Sistem monitoring beban listrik dan perbaikan faktor daya menggunakan PZEM004T dan dashboard Adafruit berbasis IoT
DOI:
https://doi.org/10.35313/jitel.v3.i3.2023.235-246Keywords:
PZEM004T, monitoring, beban listrik, IoT, AdafruitAbstract
Graphic User Interface (GUI) pada suatu sistem Internet of Things (IoT) salah satunya dipengaruhi oleh monitor yang mudah diakses, fleksibel, serta efisien dalam penggunaannya. Hal ini sudah banyak didiskusikan namun masalah tersebut masih belum dapat ditingkatkan. Salah satu solusi dari masalah tersebut adalah dengan dihadirkannya MQTT Adafruit, yang mana dengan menggunakan MQTT Adafruit GUI untuk memonitor suatu sistem IoT dapat mempermudah kontrol dan kendali jarak jauh. Penelitian ini bertujuan untuk menghadirkan sistem monitoring beban listrik dan perbaikan faktor daya menggunakan PZEM004T berbasis IoT yang sudah menggunakan MQTT Adafruit sebagai user interface-nya. Metode yang digunakan melalui pendekatan analysis, design, development, implementation, evaluation (ADDIE). Hasil penelitian menunjukan bahwa sistem ini layak digunakan karena berdasarkan hasil percobaan faktor daya yang sebelumnya 0,35 menjadi 0,89 setelah dilakukan perbaikan faktor daya. Sistem ini juga memberikan kemudahan bagi pengguna dan dapat melakukan monitoring secara real time arus, tegangan, faktor daya, daya nyata, daya semu, dan daya reaktif baik hanya dengan menggunakan smartphone, laptop, tablet, maupun komputer. Berdasarkan hasil uji reliabilitas alat ini memiliki selisih yang kecil antara setiap hasil percobaan.
References
P. W. Rusimamto, “Implementation of arduino pro mini and ESP32 cam for temperature monitoring on automatic thermogun IoT-based,” Indones. J. Electr. Eng. Comput. Sci., vol. 23, no. 3, pp. 1366–1375, 2021.
A. Sumardiono, S. Rahmat, E. Alimudin, and N. A. Ilahi, “Sistem Kontrol-Monitoring Suhu dan Kadar Oksigen pada Kolam Budidaya Ikan Lele,” JTERA (Jurnal Teknol. Rekayasa), vol. 5, no. 2, p. 231, 2020,.
G. Ilieva, “IoT in Distance Learning during the COVID-19 Pandemic,” TEM J., vol. 9, no. 4, pp. 1669–1674, 2020.
J. Kustija, I. Surya, and D. Fahrizal, “ELECTRICAL ENERGY SAVINGS BY UTILIZING INTERNET-BASED AUTOMATIC,” Int. J. Eng. Appl. Sci. Technol., vol. 7, no. 10, pp. 144–150, 2023.
R. E. Pawinanto, J. Yunas, and A. M. Hashim, “Design optimization of active microfluidic mixer incorporating micropillar on flexible membrane,” Microsyst. Technol., vol. 25, no. 4, pp. 1203–1209, 2019.
F. Jonathan, “Prototype of Home Power Monitoring Tool for Electrical Outlet Using ESP32,” 8th International Conference on ICT for Smart Society: Digital Twin for Smart Society, ICISS 2021 - Proceeding. 2021.
Z. Chen, “Real time object detection, tracking, and distance and motion estimation based on deep learning: Application to smart mobility,” 2019 8th International Conference on Emerging Security Technologies, EST 2019. 2019.
S. Anand, “Study and design of smart embedded system for remote health monitoring using internet of things,” Lecture Notes in Electrical Engineering, vol. 511. pp. 409–414, 2019.
A. Škraba, “Prototype of Group Heart Rate Monitoring with ESP32,” 2019 8th Mediterranean Conference on Embedded Computing, MECO 2019 - Proceedings. 2019.
N. A. Afifie, “Evaluation Method of Mesh Protocol over ESP32 and ESP8266,” Baghdad Sci. J., vol. 18, no. 4, pp. 1397–1405, 2021.
P. Megantoro, “IoT-based weather station with air quality measurement using ESP32 for environmental aerial condition study,” Telkomnika (Telecommunication Comput. Electron. Control., vol. 19, no. 4, pp. 1316–1325, 2021.
N. Nikolov, “Research of Secure Communication of Esp32 IoT Embedded System to.NET Core Cloud Structure using MQTTS SSL/TLS,” 2019 28th International Scientific Conference Electronics, ET 2019 - Proceedings. 2019.
T. Swati, “Industrial process monitoring system using Esp32,” Int. J. Recent Technol. Eng., vol. 7, no. 6, pp. 290–294, 2019.
Y. H. Lin, “Novel smart home system architecture facilitated with distributed and embedded flexible edge analytics in demand-side management,” Int. Trans. Electr. Energy Syst., vol. 29, no. 6, 2019.
R. B. Salikhov, “Internet of things (IoT) security alarms on ESP32-CAM,” Journal of Physics: Conference Series, vol. 2096, no. 1. 2021.
N. Fujii and N. Koike, “IoT remote group experiments in the cyber laboratory: A FPGA-based remote laboratory in the hybrid cloud,” Proc. - 2017 Int. Conf. Cyberworlds, CW 2017 - Coop. with Eurographics Assoc. Int. Fed. Inf. Process. ACM SIGGRAPH, vol. 2017-Janua, pp. 162–165, 2017.
M. Ansari, “Peak Power Management to Meet Thermal Design Power in Fault-Tolerant Embedded Systems,” IEEE Trans. Parallel Distrib. Syst., vol. 30, no. 1, pp. 161–173, 2019.
D. Wahyudin, S. Hasegawa, and A. Kamaludin, “Students’ viewpoint of computer game for training in Indonesian universities and high schools,” Educ. Inf. Technol., vol. 22, no. 4, pp. 1927–1945, 2017.
M. Babiuch, “Creating a Mobile Application with the ESP32 Azure IoT Development Board Using a Cloud Platform,” 2021 22nd International Carpathian Control Conference, ICCC 2021. 2021.
U. Muhammad and F. Azis, “Rancang Bangun Media Pembelajaran Cos Phi Meter Dan Wattmeter Berbasis Arduino,” J. Electr. Eng., vol. 1, no. 2, pp. 54–56, 2020.
I. Abed and H. Naser, “ESP32 Microcontroller Based Smart Power Meter System Design and Implementation,” Al-Rafidain Eng. J., vol. 25, no. 2, pp. 137–145, 2020.
J. Kustija, K. S. Nur Adillawati, and D. Fauziah, “Smart home system to support Bandung smart city programme,” Pertanika J. Sci. Technol., vol. 25, no. S, pp. 77–88, 2017.
J. Kustija, I. Purnama, I. Surya, and D. Fahrizal, “Wireharness continuity test equipment design microcontroller-based aircraft module and atmega328p NRF24l01 + Wireless,” Int. J. Sci. Technol. Res. Arch., vol. 04, no. 2, pp. 1–11, 2023.
I. Surya and J. Kustija, “Dashboard for Industrial Load Control and Remote Power Factor Correction Based on Adafruit ’ s MQTT,” Bul. Ilm. Sarj. Tek. Elektro, vol. 5, no. 1, pp. 76–85, 2023.
M. A. Rahman, “Remote monitoring of heart rate and ECG signal using ESP32,” Proceedings - 2021 4th International Conference on Advanced Electronic Materials, Computers and Software Engineering, AEMCSE 2021. pp. 604–610, 2021.
J. Kustija and N. Dwi Jayanto, “IoT Implementation for Development of Remote Laboratory (Case Study on Microscope Practice),” Reka Elkomika, vol. 3, no. 1, pp. 20–29, 2022.
J. Kustija and Purnawan, “Solutions To Overcome Inequality in Laboratory Facilities and Laboratory Sharing in Similar Institutions Remote Laboratory Based,” J. Eng. Sci. Technol., vol. 17, no. 3, pp. 1792–1809, 2022.
J. Kustija and F. Andika, “Control - Monitoring System Of Oxygen Level, Ph, Temperature And Feeding in Pond Based on Iot,” REKA ELKOMIKA J. Pengabdi. Kpd. Masy., vol. 2, no. 1, pp. 1–10, 2021.
T. Vince, “IoT implementation in remote measuring laboratory VMLab analyses,” J. Univers. Comput. Sci., vol. 26, no. 11, pp. 1402–1421, 2020.
J. Kustija and A. N. G. S, “SCATS ( Sydney Coordinated Adaptive Traffic System ) as A Solution to Overcome Traffic Congestion in Big Cities,” vol. 3, no. May, pp. 1–14, 2023.
N. D. Jayanto and J. Kustija, “Remote desktop system in IoT and HTML 5-based virtual laboratory for HMI (Human Machine Interface) practicum and hydraulic simulation,” IOP Conf. Ser. Mater. Sci. Eng., vol. 830, no. 4, 2020.
J. Kustija, A. Ana, and N. D. W. I. Jayanto, “Web-based and thinvnc remote laboratory implementation to support students skills in mechatronics course to face the industrial revolution 4.0,” J. Eng. Sci. Technol., vol. 16, no. 2, pp. 1800–1813, 2021.
I. Surya and J. Kustija, “Implementation of the Electricity Load Monitoring Trainer and Internet of Things-based Power Factor Improvement,” Int. J. Sci. Res. Publ., vol. 12, no. 11, pp. 206–215, 2022.
C. Palmer, “Virtual reality based digital twin system for remote laboratories and online practical learning,” Advances in Transdisciplinary Engineering, vol. 15. pp. 277–283, 2021.
C. ?ammas, “The VITO (pn 20150100457, 2015): Novel Training Kit to Limit Down the Learning Curve of the Upper GI Endoscopy Operations,” Advances in Intelligent Systems and Computing, vol. 1026. pp. 370–376, 2020.
E. Madrigal, “Going remote: Maintaining normalcy in our pathology laboratories during the COVID-19 pandemic,” Cancer Cytopathology, vol. 128, no. 5. pp. 321–322, 2020.
A. Benali, M. Khiat, and M. Denai, “Voltage profile and power quality improvement in photovoltaic farms integrated medium voltage grid using dynamic voltage restorer,” Int. J. Power Electron. Drive Syst., vol. 11, no. 3, pp. 1481–1490, 2020.
M. D. Tobi and V. N. Van Harling, “Prototype Design of Wireless Electric Energy Transmission System and Distance Electric Recording Record System Using PZEM004T and NRF24L01 Module,” J. Phys. Conf. Ser., vol. 1783, no. 1, 2021.
made adi surya antara and W. A. Suteja, “Analisis Arus, Tegangan, Daya, Energi, Dan Biaya Pada Sensor Pzem-004T Berbasis Nodemcu Esp8266,” Patria Artha Technol. J., vol. 5, no. 1, pp. 76–84, 2021.
P. Roy, S. Karmakar, P. Basak, S. Das, and S. Khatua, “Designing of a device for checking the polarity and continuity of any electrical and electronics circuit,” Irjet, vol. 3, no. 7, pp. 170–172, 2016.
E. Haritman, Y. Somantri, D. Wahyudin, and E. Mulyana, “A Remote PLC Laboratory (RLab) for Distance Practical Work of Industrial Automation,” IOP Conf. Ser. Mater. Sci. Eng., vol. 306, no. 1, 2018.
J. Kustija, I. Surya, and D. Fahrizal, “Design of automated power factor monitoring and repair tool for industry in real time based on Internet of Things,” Int. J. Sci. Technol. Res. Arch., vol. 02, no. 03, pp. 0–7, 2022.
Downloads
192
Published
Issue
Section
License
Copyright (c) 2023 Irgi Surya, Jaja Kustija, Roer Eka Pawinanto, Resa Pramudita, Muhammad Adli Rizqulloh, Didin Wahyudin, Erik Haritman
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
