Desain dan implementasi modul praktikum SCADA untuk otomasi gedung berbasis Ethernet
DOI:
https://doi.org/10.35313/jitel.v3.i3.2023.221-234Keywords:
Ethernet, HMI, otomasiAbstract
Bidang otomasi tercipta lebih dari tiga dasarwasa sebagai upaya untuk meningkatkan kemudahan dalam aspek pengoperasian suatu sistem yang kompleks di sektor industri, komersil dan lain sebagainya. Teknologi tersebut memiliki keuntungan seperti, mempermudah pengawasan, dan pengendalian sistem industri pada jarak yang cukup jauh. Pada penelitian ini penulis mengusulkan pengawasan jaringan sub-sub sistem otomasi gedung yang berupa simulator-simulator dan hasil pengawasannya beserta pengendaliannya dapat di pantau melalui HMI dengan media komunikasi ethernet sebagai perolehan dan pengiriman perintah. Sistem tersebut akan melakukan pemantauan status operasi jaringan dari sub-sub sistem otomasi baik dalam keadaan normal maupun terdapat gangguan. Pengaturan parameter dari setiap perubahan kondisi dilakukan secara real-time dan data tersebut dapat dipantau oleh pusat kendali utama. Hasil penelitian menunjukkan sebuah konsul kendali beserta sub-sub sistem otomasi gedung yang berupa simulator telah terintegrasi dengan kendali pusat dan dapat bekerja dengan baik ketika terjadi gangguan, tampilan HMI pada pusat kendali utama dapat menerima informasi indikasi gangguan dari setiap sub-sub sistem simulator. Ketika gangguan terjadi pada sub sistem, maka lampu indikasi yang berada pada pusat kendali utama akan berwarna hijau, dan kondisi normal akan berwarna merah. Untuk respon penerimaan data dari setiap sub sistem menunjukkan waktu yang cukup cepat yaitu dibawah 3,5 detik.
References
V. Graveto, T. Cruz, and P. Simoes, “A Network Intrusion Detection System for Building Automation and Control Systems,” IEEE Access, vol. 11, no. January, pp. 7968–7983, 2023.
J. O. N. Montalban, E. Iradier, and G. S. Member, “NOMA-Based 802 . 11n for Industrial Automation,” IEEE Access, vol. 8, no. September, pp. 168546–168557, 2020.
G. Hayduk, P. Kwasnowski, and Z. Miko?, “Building management system architecture for large building automation systems,” Proc. 2016 17th Int. Carpathian Control Conf. ICCC 2016, no. June, pp. 232–235, 2016.
M. Sverko, T. G. Grbac, and M. Mikuc, “SCADA Systems With Focus on Continuous Manufacturing and Steel Industry: A Survey on Architectures, Standards, Challenges and Industry 5.0,” IEEE Access, vol. 10, no. October, pp. 109395–109430, 2022.
T. G. Jean-Philippe, A. S. Maiga, A. Daouda, A. I. Foulani, and B. Laarabi, “Supervisory of a domestic electrical plant based on ethernet network,” Proc. 2018 6th Int. Renew. Sustain. Energy Conf. IRSEC 2018, vol. 7, 2018.
S. U. Abdi, K. Iqbal, and J. Ahmed, “Development of PC-based SCADA training system,” Proc. IEEE Int. Conf. Ind. Technol., vol. 2016-May, pp. 1192–1197, 2016.
K. M. Tofani, P. A. Permana, B. B. S. D. A. Harsono, D. R. Jintaka, and K. G. H. Mangunnkusumo, “SCADA System Implementation for Small System Electricity,” Proceeding - 2020 2nd Int. Conf. Ind. Electr. Electron. ICIEE 2020, vol. 2, pp. 57–61, 2020.
B.B.Shabarinath and N. Gaur, “MODBUS Communication in Microcontroller Based Elevator Controller,” Int. Conf. Control. Autom. Robot. Embed. Syst., vol. 1, no. 1, pp. 1–5, 2013.
P. Panchal, A. Patel, and J. Barve, “PI control of level control system using PLC and LabVIEW based SCADA,” 2015 Int. Conf. Ind. Instrum. Control. ICIC 2015, vol. 1, no. 1, pp. 1196–1201, 2015.
K. M. Tofani, P. A. A. Pramana, B. B. S. D. A. Harsono, D. R. Jintaka, and K. G. H Mangunnkusumo, “SCADA systems design to optimize and automate microgrids systems in Indonesia,” Proceeding - 2nd Int. Conf. Technol. Policy Electr. Power Energy, ICT-PEP 2020, vol. 3, pp. 187–192, 2020.
R. Al-Dalky, O. Abduljaleel, K. Salah, H. Otrok, and M. Al-Qutayri, “A Modbus traffic generator for evaluating the security of SCADA systems,” 2014 9th Int. Symp. Commun. Syst. Networks Digit. Signal Process. CSNDSP 2014, vol. 9, pp. 809–814, 2014.
J. Luswata, P. Zavarsky, B. Swar, and D. Zvabva, “Analysis of SCADA Security Using Penetration Testing: A Case Study on Modbus TCP Protocol,” 29th Bienn. Symp. Commun. BSC 2018, vol. 29, pp. 1–5, 2018.
P. Shukla et al., “Design and development of a MODBUS automation system for industrial applications,” Int. Conf. Comput. Appl. Electr. Eng. - Recent Adv. CERA 2017, vol. 6, pp. 515–520, 2017.
H. Zhang, X. Wang, Y. Yan, and T. Zhang, “Sewage treatment control system design based on industry ethernet,” Int. Conf. E-Product E-Service E-Entertainment, ICEEE2010, pp. 1–4, 2010.
E. V. Solomin, D. V. Topolskiy, and N. D. Topolskiy, “Integration of adaptive digital combined current and voltage transformer into digital substation Ethernet grid,” Int. Sib. Conf. Control Commun. SIBCON 2015 - Proc., pp. 1–4, 2015.
V. I. Nguyen, W. Benjapolakul, and K. Visavateeranon, “A high-speed, low-cost and secure implementation based on embedded ethernet and internet for SCADA systems,” Proc. SICE Annu. Conf., pp. 1692–1699, 2007.
M. Postolache, “A MODBUS / SLLDN Gateway Implementation for Interfacing WSANs to SCADA Systems,” vol. 21, pp. 660–665, 2017.
S. Su, S. Gu, Y. Zhao, Z. Chen, H. Wang, and W. Yang, “Human-Ocular-Physiological-Characteristics- Based Adaptive Console Design,” IEEE Access, vol. 8, pp. 109596–109607, 2020.
D. K. Kushwaha and P. V. Kane, “Ergonomic assessment and workstation design of shipping crane cabin in steel industry,” Int. J. Ind. Ergon., vol. 52, pp. 29–39, 2016.
Y. Xihui, Z. Dinghua, L. Changde, and Y. Suihuai, “Design of controller panel based on ergonomics,” Int. Conf. Comput. Ind. Des. Concept. Des., vol. 11, pp. 589–594, 2010.
L. Zhou, Q. Xue, X. Shi, and D. Cheng, “Research on Rationality of the Riot Equipment Console Based on Ergonomics,” Int. Conf. Ind. Eng. Appl., vol. 6, pp. 866–870, 2019.
H. Qiu, W. Fang, and B. Guo, “A Layout Generation Algorithm for Unequal-Area Display and Control Console Considering Ergonomics,” IEEE Access, vol. 8, pp. 29912–29921, 2020.
B. Chen, L. Deng, and L. Li, “Research on product design driven by reach area,” Int. Symp. Comput. Intell. Des., vol. 1, pp. 178–181, 2010.
G. T. Holman, B. J. Carnahan, and R. L. Bulfin, “Using Linear Programming to Optimize Control Panel Design from an Ergonomics Perspective,” Proc. Hum. Factors Ergon. Soc. Annu. Meet., vol. 47, no. 10, pp. 1317–1321, 2003.
J. Y. Han, Y. M. Kim, Y. L. Rhie, S. H. Ahn, H. Choi, and M. H. Yun, “Design optimization of control layout for naval MFC (multi-function console) using a modified layout analysis method,” Proc. Hum. Factors Ergon. Soc., vol. 59, pp. 1351–1355, 2015.
B. Fu and H. Ren, “Design and implementation of touch-sensitive console panel of ship maneuvering simulator,” IEEE Int. Conf. Comput. Commun., vol. 2, pp. 920–924, 2017.
Y. L. Rhie, Y. M. Kim, M. Ahn, and M. H. Yun, “Design specifications for Multi-Function Consoles for use in submarines using anthropometric data of South Koreans,” Int. J. Ind. Ergon., vol. 59, pp. 8–19, 2017.
Y. Xu, Q. Meng, and Z. Yang, “Particle swarm algorithm applied in the layout optimization for console,” Int. Conf. Adv. Comput. Control, vol. 2, pp. 541–544, 2010.
J. Oakman, R. Stuckey, and N. Kinsman, “Using evidence to support the design of submarine control console workstations,” Appl. Ergon., vol. 79, pp. 54–65, 2019.
P. Chidambaram, “Perspectives on human factors in a shifting operational environment,” J. Loss Prev. Process Ind., vol. 44, pp. 112–118, 2016.
A. Soetedjo and Sotyohadi, “Modeling of occupancy-based energy consumption in a campus building using embedded devices and IoT technology,” Electron., vol. 10, no. 18, pp. 1–24, 2021.
D. Selisteanu, E. Petre, R. Prejbeanu, I. M. Popescu, and S. Mehedinteanu, “Software solutions for simulation, monitoring and data acquisition in wastewater treatment plants,” Proc. 2020 21st Int. Carpathian Control Conf. ICCC 2020, vol. 21, no. 1, pp. 1–6, 2020.
Y. Jaganmohan Reddy, A. Ramsesh, K. Padma Raju, and Y. V. Pavan Kumar, “A novel approach for modeling and simulation of hybrid power systems using PLCs and SCADA for hardware in the loop test,” IET Conf. Publ., vol. 1, no. 1, pp. 545–553, 2011.
M. Awad and A. I. Ibrahim, “PC-based SCADA simulator for distribution system analysis,” Innov. 4th Int. Conf. Innov. Inf. Technol. IIT, vol. 1, no. 1, pp. 332–337, 2007.
Downloads
195
Published
Issue
Section
License
Copyright (c) 2023 Febi Ariefka Septian Putra, Nanang Mulyono, Toto Tohir, Dwi Septiyanto, Sofyan Muhammad Ilman
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
